The home can use a range of new ideas to help with energy usage – including Solar Thermal and Solar Water Heating Collectors. Equally there is electricity that is generated through roof-installed panels. A further factor revolves around stoves and boilers – which are known as Biomass Energy. There is also the ground heat from the Sun – now known as Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines, we are finally getting to very old forms of energy production.

Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.

For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.

Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.

Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Other less known materials within this field are Agricultural and Municipal Waste. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. Municipal Waste such as food or wood can also be utilised as a biomass product.

Systems Based On Geo-Thermal Energy: By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. These heat pumps do need some power to operate; but for every one unit of energy they use, they generate four units of energy in return. This system can go even further – if energy efficient items such as wind turbines or solar electrical panels are used.

Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Then there is Hydropower – something within Europe that the UK excels in. Although new in its approach, the act of harnessing energy from water has been going on for a long time. In total, this could produce something like 2 percent of all electricity required in the UK.

By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ – thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.

Electricians and Plumbers in particular are expected to provide the main thrust of domestic installation expertise. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. This is a new industry – but getting the right certification can only improve job security and opportunities for the future. Electrical or plumbing training that incorporates green technology could be very useful for the future.

Copyright Scott Edwards. Browse around Green Engineer Certification or Click HERE.

The leading accepted trade qualification bodies in Britain are City & Guilds together with EAL (EMTA Awards Ltd). In addition, teens working at City & Guilds qualifications at specialised educational institutions might locate working contracts to finish the more practical NVQs. Overall, this type of tuition takes a lot of years to accomplish. Mature career-changers generally choose from more compressed training systems that will work around their particular existing responsibilities. They never require time consuming NVQ preparation, due to the fact that they may be seeking jobs within private properties. Career-changers require the very best value for money, coupled with greater freedom. Enrolees surface with sound, trade-authorized electro-mechanical certification that they can certainly quickly employ within houses anywhere.

Commercially, employed electrical engineers usually perform a thirty seven hr work-week, as well as possibly overtime during the weekends. Salaries generally come in at about the twenty six thousand mark, but it will be more than that in some areas. Having said that, electrical engineers who are self-employed can expect more erratic hrs, then again these people might also charge more income. To become self-employed equally means that there can be running costs to think about, hence quotes must reflect that.

A need to gain self-employment might be often the thing that triggers any step towards the electrical sector. Just about all newly qualified mature electrical trades-people like to either do the job for themselves, or perhaps on some sort of contract schedule. It is no longer surprising the instant you take a look at the quantity of work here in the domestic marketplace particularly. Then again, there will be people which really want the skillsets as some sort of back-up, to do smallish tasks together with their full-time career. Some others want the skills, and also legal approvals, in order to complete much more of their very own DIY.

Whatever your current starting point, you can expect to cover certain necessary methods whoever you learn through. A quality all round route for beginners could possibly be an EAL Domestic Contractors Program, at Level 2. Any training is going to deal with basic cabling concepts – setting up new electrical apparatus, re-wiring people’s homes, and fitting hardware and so forth. You are going to be prepared for the EU Building Regulations accreditation – that is known as Part P. Each and every jobbing domestic electrician also needs to obtain the City & Guilds (C&G) 2382 17th Edition IEE Wiring Regulations Credential, accordingly preparation will undoubtedly be included for this also. Some other quick C&G programmes will present you with increased business opportunities. As soon as you add the ‘Inspection, Testing and Certification of Electrical Installations’ you can register with the NICEIC and then look at, check out and certify industrial plus commercial installations, together with domestic ones.

Should house-holders stumble on an domestic electrician they’re thrilled with, they may speak with some other people about them and thus provide a variety of cost-free advertising. Therefore as well as being great at your occupation, always remain considerate as well as helpful. Good manners sincerely do help to make a big difference.

Am I the appropriate kind of personality for this work? The main job is very practical and hands-on, so you must be skilled with your hands, as well as have the ability to utilise tools suitably. Systematic attention to detail is vital, so to conform to safe practices guidelines. You have to be contented operating on your own, if you’re deliberating self-employment. You might in addition require a first-class head for heights, in view that the task isn’t necessarily at ground level! Basically, you would have to have motivation and a creative attitude, if you decide to launch out on your own.

The overall approach will probably demand approximately three hundred to 500 hrs of tuition, which could be an element of home learning and also a little in-centre practice. The moment you’ve completed your skillset and certification, you should have capabilities that would fix you up for life.

Written by Scott Edwards. Navigate to Electrician Qualifications or Electricians Courses.

The home environment, for example, encompasses a range of energy ideas – including Solar Thermal and Solar Water Heating solutions. Equally there is electricity that is generated through roof-installed panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. What shouldn’t be forgotten is the heat stored in the ground from the Sun – often simply referred to as Ground Source Heat Pumps. Not all ‘Green Energy’ is new – by considering Wind Power and Hydropower we are looking at some of the oldest forms of energy production.

Thermal Energy Systems: By using different technologies, Solar Energy is effectively made up of two types of solar panels. Making hot water from solar energy is the first stage – and is known as Solar Water Heating Collection. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels – which transform solar radiation into electricity. Across the board, Solar Panels should be mounted on a south facing roof, at an angle of 30 degrees away from horizontal – and to some extent away from blocking trees, surrounding buildings and chimneys.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Biomass Energy Based Systems: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Much of the UK wood crop is sustainable, in order to ensure that C02 produced during any heating process is absorbed.

Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Also producing high yields of dry matter are the perennial grasses. Equally significant within this practice sit Municipal and Agricultural waste products. To begin with, Agricultural Waste is often produced as part of the agricultural process overall. However, waste derived from food or wood is another biomass entity – called Municipal Waste.

Systems Based On Geo-Thermal Energy: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greate return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Wind Energy – An Update On Old Technology: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. Where the local power grid demands it, energy can be diverted and sold there. To be fair, the UK has the highest level of wind generation within Europe. The fact remains that in the UK, there exists the ability to realise 10 percent of our electricity requirement from wind power – as opposed to the current value of just 1 percent. Although electricity is still being produced from between 2-10 p per kWh, it could be generated from as little as 2p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Finally, we have Hydropower; an area in which the UK does well within Europe. Having said that, the art of using energy from moving water (just like wind power) is very traditional. In total, this could produce something like 2 percent of all electricity required in the UK.

The Hydropower process uses a turbine that can convert the energy from one form into another. The important thing is that, without having to rely on water storage, the turbines can generate electricity. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.

The demand on ‘Green Energy’ continues to develop – in light of the energy demands worldwide. The UK remains one of the main beneficiaries of this technology.

It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With EEC and UK recognition of renewable energy getting ever-higher on the political agenda, the grants and financial aid for introduction of these systems can only increase. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To that end, it may be worth thinking about combined training. You can then get plumbing or electrical training along with green knowledge.

Author: Scott Edwards. Navigate to Solar Energy Training or Solar Energy Courses.

Solar Thermal and Solar Water Heating Collectors are examples of what can be used in the house as part of renewable energy technologies. Following on it is items such as the Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Another key element is that of Biomass Energy, which relates to Stoves and Boilers burning Wood, Fuel and Pellets. There is the old heat from the Sun now known as Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more habitual forms of energy generation.

Through a brief review of each we can look at those wanting to train and work in this area and the skills that they will need. Considering the points raised so far, this is expected to be somewhere in the domain of the Plumber, the Gas Engineer and the Electrician. It would be worth gathering information from as many different sources as possible, so check out our other pages on Electrical, Green and Plumbing careers. So it is worth checking out the sites for a variety of training providers as a result bookmark (CTRL-D) this page so you can come back.

Thermal Solar Energy – Often commonly referred to as Solar Energy, this is primarily captured by two types of solar panels; each of which utilises different technologies for the process. As a first draft there are elements absorbing energy from the sun and creating hot water known as Solar Water Heating Collectors. Furthermore, there are the Solar Electrical Panels more correctly known as Photovoltaic heat collectors which changes solar radiation into electricity. To get best results these panels need to be situated 30 degrees from the horizontal, on a south facing roof and obviously free from blockages such as trees and buildings.

As a result, Solar Water Power is often considered the most common form of Solar Energy in the UK. Solar Water heating systems are extremely important and can provide over half of hot water needs to houses within the UK. The typical cost for installation ranges from 500-1500 pounds for a DIY system all the way through to 2-5k for a professional fit.

Systems Utilising Biomass Energy: Although in the modern world this now includes ‘Energy Crops’ it also takes in suitable plant and animal substances. Due to its adaptability it can produce a range of energy forms from heat and electricity through to combinations of both. It is interesting to note that the UK has some of the largest quantities of Biomass material to generate electricity within Europe. One of the main factors of this style of energy is the result without the impact on C02. With each tree being planted as another is felled you can see how the C02 produced during heating is minimised and why the system is deemed sustainable.

‘Energy Crops’ such as Willow and Poplar play a major part in the process under the banner of Short Rotation Coppice (SRC). Of equal importance is the ability to produce dry matter and perennial grasses are very good for this. Equally significant within this practise sit Municipal and Agricultural waste products. To begin with Agricultural Waste is often produced as part of the agricultural process overall. Whereas Municipal Waste is derived from wood or food and can be used for biomass energy.

Geo-Thermal Energy Systems… This is where both warm water and electricity can be produced as by products of the natural heating of the Earth by the Sun. By using the ground source temperature of approximately 12 degrees we can either heat or cool buildings within the UK. Heat pumps are recognised as a very good form of power generation generally giving back four units of energy for everyone used. Without a doubt the energy generated from wind turbines and solar electrical panels alongside heat source pumps can be almost 100 percent renewable.

Wind Energy: When you consider the milling of grain and pumping of water it is easy to see how long wind energy has been with us. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. With regard to wind generation it is the UK that has the highest production within Europe. The fact remains that in the UK there exists the ability to realise 10 percent of our electricity requirement from wind power as opposed to the current value of 1 percent. Frankly, electricity can be realised from as little as 2p per kWh as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.

Hydropower is a subject that suits the UK energy production system. Having said that the art of using energy from moving water, as like wind power is very traditional. Interestingly enough this type of energy production meets 2 percent of the UK electrical demand in total.

It is a Hydropower process, using a turbine that can convert the energy from one for into another. It is by either water drops or Natural River runs that turbines can work through this process ‘Micro-Hydro’ however avoids this system killed off by the larger national distribution methods and plans to use the outdated sluices and dams. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.

The demand on ‘Green Energy’ continues to develop in light of the energy demands worldwide. That said the UK is well placed, especially in the domestic sector to take full advantage of the various items above.

With the bulk of development work in the domestic field both the Plumbers and Electricians are set to capitalise in this area. You can now get a range of grants to support the growth of renewable energy ideas within the European market. Equally important is the role of gaining qualifications to install items that we have talked about. By mixing green training with those of electrical or plumbing you could cover both angles.

Copyright Scott Edwards. Hop over to Solar Training or plumbingtraininginfo.co.uk/Green-Certification.html.

To be fair being with a regular employer often results in working from Monday to Friday, 9am to 6pm as standard. Salaries of between 15k – 30k p.a. are easily achievable and will include typical benefits such as holiday pay and sickness allowance – what you’d generally expect from any UK employed status. That said it is by working longer than typically 9am to 6pm, Mon to Fri that self employed people achieve higher incomes than those adopting a traditional approach. This is more common in the domestic market where self employed plumbers often have to work evenings and weekends to suit those clients that work during the week.

There is also the issue of self-employment itself – which definitely suits some people more than it suits others. The inclusion of key elements such as utilising good ‘business sense’, covering areas such as advertising and marketing and getting your own cost-per-hour correct is integral to the picture. To be fair most self-employed people will have to prepare for additional costs including those relating to legal and accountancy fees as well as those of transport and material usage. While these costs can mount up, so too do the benefits, however the costs should always remain a smaller part of the income generated. And the benefits nearly always far outweigh the downsides!

Without a doubt Student Entrants are looking for companies who can offer them regular employment and thereby teach them from experience. As quickly as possible the Self Employed Entrant needs to increase their list of accreditations that they will rely upon. To be fair it is the ‘domestic’ market which appeals to a large number of self-employed plumbers and not necessarily that of the commercial sector. (Well the majority do at least)

There does appear to be some union between certification relating to each path of Plumbing education and hence the industry. Without a doubt the issue of NVQ’s (SVQ’s in Scotland) raises a constant concern as to the way forward.

From the beginning the Student Entrant instead of the Self Employed Entrant is much more reliant upon the NVQ requirements. Therefore many Self Employed Entrants will meet their clients’ needs through the use of a wider range of certifications. Without a doubt the self employed person needs to quickly gain the core domestic- centred qualifications to satisfy their typical household-based clients. Once they have covered the core parts the Student Entrant will often carry on their study not dissimilar to an apprenticeship in the workplace (where the NVQ element can be appraised.) By using this cheaper form of study the Student Entrant can make sound financial savings from the outset. However, in relation to the Student Entrant the Self Employed Entrant will gain certifications faster and therefore achieve substantial financial gains in the long term.

This shows the necessity of a clear careers discussion, covering the overall study and certification requirements alongside the required financial return. For adults with demands of say a 20kp.a and a family to look after, the prospect of going back to college and spending a further 3 years in low-paid apprenticeship work can be very daunting. Equally, many self-employed students fund the courses themselves whereas the Student Entrants often have their studies paid for them as part of their overall apprenticeships. These costs (for self-employed status) can often end up around 3k-10k+, dependent upon the course structure and the level of certification sought.

Whilst the Self Employed Entrant can consider a wider range of education forms including private colleges the Student Entrant is limited to known further-education colleges. It is the lead into familiar skill-sets and qualifications that commercially fixed plumbing course companies offer as part of their training paths. In the current climate the ability of Self Employed Entrants to maintain their current financial situation and job, whilst at the same time as training in the evening, part-time or on self study classes remains one of the advantages of this system. From this it makes sense to gather as much detail as you can especially with so many training options available. Why not book mark this page (CTRL-D) and then you can come back and review your options from the links and adverts we have provided for you.

Many plumbing students will go on to consider additional courses to increase their ‘marketability’. It is by training in areas such as Gas, Green Energy and Electrical that Plumbers can gain extra certifications. A typically popular route for Plumbers is Gas training, especially as this forms part of the usual commercial and domestic heating system.

It is with its main subjects, alongside added NVQ’s, that result in Gas Training being viewed as a technical program. It also features many options for on-going training, especially for those who trained as a plumber first and are now looking at some extra skills to add to their stable. It could be said, from that viewpoint, that a hybrid of Plumbing/Gas training would be more suited to the mature student. Indeed, the path for the Mature Student seems to be to drop the NVQ elements and to focus on the core subjects.

It is this distinct training hybrid that appears to suit the self-employed professional. Without a doubt the appeal is to learn a greater range of skill-sets and at the same time earn money from them. Instead of having to rely upon third parties to complete certain skill-sets, this adds to their commercial viability. Whilst sub-contracting can reduce the earning of a particular job perhaps more important is the deterioration of the value in a customer’s eye as they have to wait for jobs to be handled by others before completion of the overall task. To have a higher value within their client base a Plumber needs to consider their relative skill sets that they offer.

Whilst the Student Entrant has the chance to develop through an established employer a Self Employed Entrant can utilise their skill levels through business skills and develop a broader range of certifications to achieve a higher income stream. Note: This information relates to the UK market, policies and industry requirements alone.

Copyright Scott Edwards. Visit Plumbing Colleges or Plumbing Training.